Valve Index Controller bracket fix

This is a replacement bracket for your valve index controller. If you like me tried to use your controller to assist in rapid deceleration due to a gravitational anomaly you may find the top can separate from the lower grip.

This is due to the two halves being connected with a tiny bracket which in my case broke in half.

This replacement bracket requires opening the top of the controller and removing the control board. There is also a screw under the grip. You can find videos showing this and just take care. You only need a T-5 screwdriver for this repair.
The bracket lives under the metal base, see the pictures. It can be a pain to put the new bracket in but you can fish it through the gap in the middle then i found the best approach is to hold the controller upside down above your head.
use a small tool to poke it into position then put a screwdriver into the screwhold in the grip to hold it in place.


Before installation i do recommend running the screws into the hole