Variable PSU Case

PLEASE READ: I made this PSU CASE with compactness in mind, printed it in PLA+ many times and felt extremely pleased with the results. This case is directly compatible with the well known 0-30v Variable PSU kit that you can easily find online, but bear in mind that power electronics may generate a lot of heat (specially in a linear psu like the metioned above), so the use of proper heatsinks and a fan cooler is a MUST. Also, depending on your cooling needs, the size may be a major limitation. Use this design at your own risk.

MEASURES: L: 118.2, W: 97.8, H: 60.4 mm

FEATURES:
- 1x hole for a 40mm FAN
- 2x holes for banana jacks on the back (input)
- 2x holes for banana jacks on the front (output)
- 2x holes for potentiometers on the front (volts & amps)
- 1x hole for the ameter-voltmeter display on the front
- 1x hole for a 3mm LED on the front
- Stand/handle for a more comfortable positioning
- Knob model included as well

PRINTING:
- Use supports for the bottom part o