MakerWorld

Statue Maker

VbarM

by user_933399547 · Statue Maker

0 Downloads

0 Likes

0 Makes

Go to Model

Work in progress. First one. Do not print in .4. The white at the bottom of the arrowhead will come off.

Category

Statue Maker

Source

MakerWorld

Published

31.08.2025

Updated

30.04.2026

What you need to print this: Intermediate Medium confidence

Why?

supports needed · large print

Single piece Supports required

Supports 2/3

Assembly 0/3

Settings 1/3

Bed size 2/3

Post-process 0/3

Printer

FDM / FFF

File format

STL

Material

Min. bed size

200 mm (Large)

Software

Cura, PrusaSlicer, or similar

Frequently Asked Questions

Which 3D printer is suitable for VbarM?

Any FDM printer should handle VbarM just fine. It's been printed on machines like Bambu Lab A1, Prusa MK4, Creality Ender 3, Anycubic Kobra. A minimum build volume of 200 mm is recommended.

Does VbarM need supports when printing?

Yes, VbarM will probably need supports for the overhangs. Tree supports work well here and are easier to remove than regular ones.

What file format is VbarM available in?

VbarM is available in STL format. These files can be opened and sliced using free software such as Cura, PrusaSlicer, Bambu Studio, or OrcaSlicer for FDM printing, or ChiTuBox and Lychee Slicer for resin printing. The download is provided through MakerWorld.

Is VbarM free to download?

Yes, VbarM is available as a free download through MakerWorld. Always check the license on the original platform to understand commercial use, remixing, and attribution requirements.

No ratings yet

No comments yet – be the first!

Similar Models

6 Suggestions

VbarM

Similar Models

Add to Collection