Vecna Hueforge

The Litch God Venca picture done in hueforge, print by layer NO AMS required, this model has no prime tower and takes up the whole bed, it can be resized if you download the 3mf files. Took the original image form the dnd wiki page for Vecna, (theres still a WOTC logo in the bottom left) I added the STL file for anyone not using AMS. layers are as listed below, I used all Bambu brand filament. print parameters below Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmFilaments Used: PLA BambuLab Matte Charcoal Transmission Distance: 0.6 PLA BambuLab Matte Scarlet Red Transmission Distance: 2 PLA BambuLab Matte Lemon Yellow Transmission Distance: 4 PLA BambuLab Basic Jade White Transmission Distance: 5This print uses 4 unique filamentsSwap Instructions: Start with Charcoal At layer #13 (1.12mm) swap to Scarlet Red At layer #16 (1.36mm) swap to Lemon Yellow At layer #26 (2.16mm) swap to Jade White for the rest.