MakerWorld
Hueforge & Lithophane
Zum Modell
Viking Tree
29
Downloads
19
Likes
23
Makes
Viking Tree2 colours Project: viking tree.hfpPrint at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 120x197.11mm in sizeYou may print at higher layer heights below the Base Thickness of 0.48mmThe Max allowed Thickness is 2.4mm and the Actual Thickness is 1.28mm Filaments Used: #080a0d PLA PolyLite Black Transmission Distance: 0.3 #ffffff PLA BambuLab Basic Jade White Transmission Distance: 6.8This print uses 2 unique filamentsSwap Instructions: Start with Black At layer #7 (0.64mm) swap to Jade White for the rest.
Hast du dieses Modell gedruckt? Einloggen und dein Make teilen!
Melde dich an, um einen Kommentar zu hinterlassen
AnmeldenNoch keine Kommentare – sei der Erste!
