MakerWorld
Hueforge & Lithophane
Ver Modelo
Viking Tree
29
Descargas
19
Likes
23
Makes
Viking Tree2 colours Project: viking tree.hfpPrint at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 120x197.11mm in sizeYou may print at higher layer heights below the Base Thickness of 0.48mmThe Max allowed Thickness is 2.4mm and the Actual Thickness is 1.28mm Filaments Used: #080a0d PLA PolyLite Black Transmission Distance: 0.3 #ffffff PLA BambuLab Basic Jade White Transmission Distance: 6.8This print uses 2 unique filamentsSwap Instructions: Start with Black At layer #7 (0.64mm) swap to Jade White for the rest.
¿Has impreso este modelo? Inicia sesión y comparte tu make.
Inicia sesión para dejar un comentario
Iniciar sesiónAún no hay comentarios – ¡sé el primero!
