Slicer Discord
Void spawns (pre-supported) – 3D printable model from MyMiniFactory MyMiniFactory
Characters & Creatures

Void spawns (pre-supported)

0 Downloads
104 Likes
0 Makes
Go to Model
Void spawns are wretched, hideous and utterly crazed demons of the dredge. They are abominations that were created accidentally by exposing dredge marines to the tear at the bottom of the oceans on Krathus IV. The same tear that created the monstrosity that is Mthulus. Where Mthulus could control the demonic influence, regular dredge warriors could not and imploded or exploded into void spawns. They now exist in between life and unlife, locked in cages and deployed as bioweapons, indiscriminately attacking the closest thing. This set can make at least 2 void spawns. The set comes with two unique bodies and 4 heads. Each head can go on any body. The set also comes with a plain 40mm base. Folder includes both supported and unsupported parts, as well as the LYS file, in case you need to adjust your supports.  Mezgike miniatures are independently designed and produced by Mezgike Pty Ltd. They are intended as third-party proxy models, collectible figures, and painting pieces for hobbyist
Category
Characters & Creatures
Source
MyMiniFactory
Published
What you need to print this: Advanced Medium confidence
Why?
supports needed · very large print
Single piece Supports required May need scaling or splitting
Supports 2/3
Assembly 0/3
Settings 1/3
Bed size 3/3
Post-process 1/3
Printer
FDM / FFF
File format
STL
Material
PLA
Min. bed size
300 mm (Extra large)
Post-processing
Painting
Software
Cura, PrusaSlicer, or similar
Frequently Asked Questions
Which 3D printer is suitable for Void spawns (pre-supported)?
Any FDM printer should handle Void spawns (pre-supported) just fine. It's been printed on machines like Bambu Lab X1C, Prusa MK4, Creality K1 Max, Anycubic Kobra Max. A minimum build volume of 300 mm is recommended.
Does Void spawns (pre-supported) need supports when printing?
Yes, Void spawns (pre-supported) will probably need supports for the overhangs. Tree supports work well here and are easier to remove than regular ones.
What file format is Void spawns (pre-supported) available in?
Void spawns (pre-supported) is available in STL format. These files can be opened and sliced using free software such as Cura, PrusaSlicer, Bambu Studio, or OrcaSlicer for FDM printing, or ChiTuBox and Lychee Slicer for resin printing. The download is provided through MyMiniFactory.
Is Void spawns (pre-supported) free to download?
Yes, Void spawns (pre-supported) is available as a free download through MyMiniFactory. Always check the license on the original platform to understand commercial use, remixing, and attribution requirements.
No ratings yet
No comments yet – be the first!

Similar Models

6 Suggestions
Feed Blog Slicer Cost Calculator Image Search Submit Kontakt Discord ☕ Buy me a coffee
DE EN FR ES IT NL

Add to Collection