Vr Raidr

This is a quest 2 cup that is meant to replace the Raidr universal cup.

IMPORTANT: This is not perfect off of the bed, you need to drill holes for as many screws as you are going to use, you will also need to either use sand paper or a soldering iron (I used that and it fit within 3 minutes) to make it fit onto the metal part that connects it to the stock.

This stl is only of the right hand so you will have to mirror it in order to print the left hand.

You can use the screw that was included with the raidr to attach it but I used one extra to be safe. You can use up to 4 for each hand.