Thingiverse
Walking Ghost
von WillemvD
0
Downloads
3
Likes
0
Makes
https://youtu.be/_YnTTrPiIz8
A 9 volt battery is installed using a small piece of double sided adhesive foam tape.
The switch is in between the leds and the motor.
Two leds are in series with a 330 Ohm resistor.
A 9 volt battery is installed using a small piece of double sided adhesive foam tape.
The switch is in between the leds and the motor.
Two leds are in series with a 330 Ohm resistor.
Hast du dieses Modell gedruckt? Einloggen und dein Make teilen!
Melde dich an, um einen Kommentar zu hinterlassen
AnmeldenNoch keine Kommentare – sei der Erste!