Weekday-Clock

You can buy this type of clock if you don´t want to print one, just search for "Day of the Week Clock".

This is a clock that shows a week instead of just one day.
It´s achieved by gearing down the hour ring of a normal clock movement 14 times.
It has a diameter of 190mm, so it should fit on a 200mm print bed.

Things you need:

* 1x Clock Movement with 16mm or 20mm shaft.
20mm https://www.amazon.de/gp/product/B076F8BDV8/
16mm https://www.amazon.de/gp/product/B017BYT3XC/

* 2x Bearings: 10x15x4mm
https://www.amazon.com/gp/product/B00RWGXNVI/

Printing
Print the following parts:
* 1x Main Body: Depending on your clock movement print the 20mm or the 16mm version.
* 1x Clockwork_Gear
* 1x Middle_Gear
* 1x Pin
* 1x Hand_Gear
* 1x Lid
* 1x Hand
* 1x Clock_Face: You can choose between german and english days, there is also a blank dial. I recommend a color change after 1.8mm.

Assembly

Push the bearings into the holes.
Put the clock movement gear onto the hou