Thingiverse
Household
Model downloaden
Window holder
882
Downloads
873
Likes
0
Makes
It is more durable than the standard window holder.
You will additionally need an M3 screw with a length of at least 15 mm and 2 nuts.
Do not try to tighten the screw, the holder should rotate freely. It is necessary to lock the second nut so that the connection does not unscrew during operation.
The design is universal and the holder can be assembled on either side of the window.
There are 2 versions of the holder base for attaching to the window frame:
- With a center-to-center distance of 28 mm
- With a center-to-center distance of 32 mm
You will additionally need an M3 screw with a length of at least 15 mm and 2 nuts.
Do not try to tighten the screw, the holder should rotate freely. It is necessary to lock the second nut so that the connection does not unscrew during operation.
The design is universal and the holder can be assembled on either side of the window.
There are 2 versions of the holder base for attaching to the window frame:
- With a center-to-center distance of 28 mm
- With a center-to-center distance of 32 mm
Heb je dit model geprint? Inloggen en deel je make!
Log in om een reactie achter te laten
InloggenNog geen reacties – wees de eerste!
