Thingiverse
Wire Spools
door aardalo
6
Downloads
7
Likes
0
Makes
Wire spool, modular, print as many as you need, with room for feet on end or in between spools.
1. Axle is screw M14 adjustable with 3mm allen key
2. Left side with holes to attach wire end all around the rim
3. Right side with cutoffs to make rom for wire holes
4. Feet/standoffs suitable for table
5. End thumb screws to lock feet position.
Considering adding a freehub, but so far unwinding the wire is fine as I usually use short lengths. Also working on a vertical stand and a on-wall swingout stand. Maybe also it would be useful with a shorter left-side (2) spool for small lengths of wire.
1. Axle is screw M14 adjustable with 3mm allen key
2. Left side with holes to attach wire end all around the rim
3. Right side with cutoffs to make rom for wire holes
4. Feet/standoffs suitable for table
5. End thumb screws to lock feet position.
Considering adding a freehub, but so far unwinding the wire is fine as I usually use short lengths. Also working on a vertical stand and a on-wall swingout stand. Maybe also it would be useful with a shorter left-side (2) spool for small lengths of wire.
Heb je dit model geprint? Inloggen en deel je make!
Log in om een reactie achter te laten
InloggenNog geen reacties – wees de eerste!