Wolf

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 124.64x200mm in size You may print at higher layer heights below the Base Thickness of 0.48mm The Max allowed Thickness is 2.24mm and the Actual Thickness is 2.24mm #000000 PLA+ Sunlu Black Transmission Distance: 0.6 #d22332 PLA+ Sunlu Red Transmission Distance: 6 #565d65 PLA+ Sunlu Grey Transmission Distance: 2 #ff7713 PLA+ Sunlu Sunny Orange Transmission Distance: 8 #ffd500 PLA+ Sunlu Pure Yellow Transmission Distance: 5 This print uses 5 unique filaments Swap Instructions: Start with Black At layer #8 (0.72mm) swap to Red At layer #10 (0.88mm) swap to Grey At layer #11 (0.96mm) swap to Red At layer #16 (1.36mm) swap to Sunny Orange At layer #21 (1.76mm) swap to Pure Yellow for the rest. This is my first attempt at a hueforge and i was happy with it so i thought id share.