Wolfs

Size 150x200mm. Do NOT adjust the thickness (Z) in your slicer! The layers will not come out right. You CAN adjust the other dimensions (X,Y) though to make it bigger or smaller, just not the thickness. Nozzle: 0.4 You may print at higher layer heights below the Min Depth of 0.64mm.  The Max Depth is 2.2mm and the Actual Depth is 2.2mm. These were my settings and colors for my print that you see in the picture. Your results may be depending on the filament you use. Filaments Used: PLA PolyLite Black Transmission Distance: 0.3 PLA BambuLab Basic Blue Gray Transmission Distance: 3 PLA Overture Brown Transmission Distance: 1.6 PLA BambuLab Basic Beige Transmission Distance: 8 PLA BambuLab Basic Jade White Transmission Distance: 5 This print uses 5 unique filaments Swap Instructions: Start with Black At layer #11 (0.96mm) swap to Blue Gray At layer #13 (1.12mm) swap to Brown At layer #14 (1.2mm) swap to Beige At layer #16 (1.36mm) swap to Jade White for the rest.