Thingiverse
XBox Controller Wallmount
door oddsocks1024
3
Downloads
4
Likes
0
Makes
Yet another game controller wallmount on Thingiverse...
This wallmount is for the standard XBox Type S controller for the original XBox. It actually seems to work reasonably well with the 'duke' variant of that controller too, even though I didn't specific design it for that. See my design list for wallmounts for other controllers
* Cable area behind the controller. You can either wrap the cable around the holder, or use a cable tie and just insert the bundle behind the controller
* Countersunk screw holes
OnShape Model
https://cad.onshape.com/documents/382928ba999c4d38e2381e1b/w/0cacb071fbde221b73115287/e/3b92cb61b0ded9c0671c80ce?renderMode=0&uiState=68109f85d31c914543a6258e
This wallmount is for the standard XBox Type S controller for the original XBox. It actually seems to work reasonably well with the 'duke' variant of that controller too, even though I didn't specific design it for that. See my design list for wallmounts for other controllers
* Cable area behind the controller. You can either wrap the cable around the holder, or use a cable tie and just insert the bundle behind the controller
* Countersunk screw holes
OnShape Model
https://cad.onshape.com/documents/382928ba999c4d38e2381e1b/w/0cacb071fbde221b73115287/e/3b92cb61b0ded9c0671c80ce?renderMode=0&uiState=68109f85d31c914543a6258e
Heb je dit model geprint? Inloggen en deel je make!
Log in om een reactie achter te laten
InloggenNog geen reacties – wees de eerste!
