Thingiverse
Z Axis Adjuster and Threaded Knobs
von TeamOliva
14
Downloads
10
Likes
0
Makes
I was working on adding a "BullsEye Blower" to my Tevo Tornado based on some YouTube videos I had watched. Included in these videos were replacement parts (mods?) for the Z-Axis Keeper at the top of the Z Lead Screw.
I needed to adjust the "plumb line" on my lead screw and I figured that this would be a good, and simple, option for me to print. The files I found here on Thingiverse were helpful, but woefully out of date. So of course I updated them using Tinkercad.
And since I was going to replace the stock Z Axis Stabilizer, I felt it was time to add a Knob on the top of the lead screw, as well.
There are many variations of "knobs" available here on Thingiverse, but none of the ones I found had the Tr8x4 thread pattern I needed. I was able to find a Tr8x4 pattern and just incorporated it into a couple of knobs that I liked. I am including two examples of the "threaded parts" here so you can add them to your own designs.
You will need a couple of M3x10 screws for the Adj
I needed to adjust the "plumb line" on my lead screw and I figured that this would be a good, and simple, option for me to print. The files I found here on Thingiverse were helpful, but woefully out of date. So of course I updated them using Tinkercad.
And since I was going to replace the stock Z Axis Stabilizer, I felt it was time to add a Knob on the top of the lead screw, as well.
There are many variations of "knobs" available here on Thingiverse, but none of the ones I found had the Tr8x4 thread pattern I needed. I was able to find a Tr8x4 pattern and just incorporated it into a couple of knobs that I liked. I am including two examples of the "threaded parts" here so you can add them to your own designs.
You will need a couple of M3x10 screws for the Adj
TeamOliva veröffentlicht auch auf
200 zusätzliche Modelle auf 1 weiteren Plattformen
Hast du dieses Modell gedruckt? Einloggen und dein Make teilen!
Melde dich an, um einen Kommentar zu hinterlassen
AnmeldenNoch keine Kommentare – sei der Erste!
