Zelda

https://www.patreon.com/cw/3D_MENTIEL Si vous aimez mon travail vennez faire un tour sur mon Patreon Projet: T Zelda.hfp Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 200x250mm in size You may print at higher layer heights below the Base Thickness of 0.8mm The Max allowed Thickness is 2.56mm and the Actual Thickness is 2.56mm #000000 PLA Deeplee Black Transmission Distance: 0.2 #54718e PLA Forshape Grey Transmission Distance: 1.6 #007e43 PLA Forshape Grass Green Transmission Distance: 1 #ffffff PLA Deeplee White Transmission Distance: 4.7 This print uses 4 unique filaments Instructions de changements: Commencer par Black At layer #14 (1.2mm) swap to Grey At layer #17 (1.44mm) swap to Grass Green At layer #23 (1.92mm) swap to White pour le reste.