Thingiverse
Lightweight Y Carriages for Leapfrog Creatr (WIP)
by redrum69
19
Downloads
15
Likes
0
Makes
You will need a pair of SHF8 rod support clamps to use these! They are cheap on eBay.
The benefits of this setup are: Substantially lighter than stock, a more rigid setup, no squeezing tension on the X rods that caused gantry sag. This setup completely eliminated my X gantry sag, and reduced ringing!
X endstop switch mount is not in default position! This is meant for my Titan extruder
carriage design. It may still work with stock extruder carriage though.
Print with at least 40
The benefits of this setup are: Substantially lighter than stock, a more rigid setup, no squeezing tension on the X rods that caused gantry sag. This setup completely eliminated my X gantry sag, and reduced ringing!
X endstop switch mount is not in default position! This is meant for my Titan extruder
carriage design. It may still work with stock extruder carriage though.
Print with at least 40
Sign in to leave a comment
Sign in