Thingiverse
Tevo Black Widow MKS TFT32 Panel
by bgsteveg
82
Downloads
76
Likes
0
Makes
A front panel for the Tevo Black Widow printer for mounting the MKS TFT32 controller.
Print the panel, case and 4 spacers.
Should not need supports, I printed mine without.
Requires 4 M3 X 25 screw and nuts.
Put the controller into case, then place the 4 M3 screws through the holes then put the spacers on the screws and mount it on the new front panel.
Plug in the cable and power on, if its not controlling the printer check the baud rate in the settings is the same as the printers.
N
Print the panel, case and 4 spacers.
Should not need supports, I printed mine without.
Requires 4 M3 X 25 screw and nuts.
Put the controller into case, then place the 4 M3 screws through the holes then put the spacers on the screws and mount it on the new front panel.
Plug in the cable and power on, if its not controlling the printer check the baud rate in the settings is the same as the printers.
N
Sign in to leave a comment
Sign in