3 Elephants-2

Project: 3 Elephants-2.hfpPrint at 100% infill with a layer height of 0.04mm with a base layer of 0.16mm The Model is 142.55x200mm in sizeYou may print at higher layer heights below the Base Thickness of 0.48mmThe Max allowed Thickness is 2.24mm and the Actual Thickness is 1.4mm Filaments Used:PLA Bambu Basic Black Transmission Distance: 0.1PLA Bambu Matte Dark Chocolate Transmission Distance: 0.1PLA+ Esun Bone White Transmission Distance: 4.9PLA Bambu Matte Nardo Gray Transmission Distance: 0.3PLA Bambu Matte Dark Brown Transmission Distance: 0.1PLA Bambu Basic Jade White Transmission Distance: 6.3This print uses 6 unique filaments Swap Instructions:Start with BlackAt layer #13 (0.64mm) swap to Dark ChocolateAt layer #16 (0.76mm) swap to Bone WhiteAt layer #18 (0.84mm) swap to Nardo GrayAt layer #19 (0.88mm) swap to Dark BrownAt layer #20 (0.92mm) swap to Bone WhiteAt layer #26 (1.16mm) swap to Jade White for the rest.