Basic45 files

The .DXF Files are meant to be sent to a laser cutter to cut out the plate and the bottom cover

the thickness required for this is 1.6mm aluminum or brass. I used Sendcutsend.com for this process. units are in mm

You'll need at least 300mm x and 200mm y volume to print this

I've printed this on en Ender 5 plus and a tevo tornado with no build plate adhesion with no issues.

You will need:

Cherry MX Compatible Switches (about 60)

any sort of wire

Teensy 2.0

about 60 diodes

soldering iron

to make a functioning keyboard