Thingiverse
Basic45 files
door averymock
1
Downloads
2
Likes
0
Makes
The .DXF Files are meant to be sent to a laser cutter to cut out the plate and the bottom cover
the thickness required for this is 1.6mm aluminum or brass. I used Sendcutsend.com for this process. units are in mm
You'll need at least 300mm x and 200mm y volume to print this
I've printed this on en Ender 5 plus and a tevo tornado with no build plate adhesion with no issues.
You will need:
Cherry MX Compatible Switches (about 60)
any sort of wire
Teensy 2.0
about 60 diodes
soldering iron
to make a functioning keyboard
the thickness required for this is 1.6mm aluminum or brass. I used Sendcutsend.com for this process. units are in mm
You'll need at least 300mm x and 200mm y volume to print this
I've printed this on en Ender 5 plus and a tevo tornado with no build plate adhesion with no issues.
You will need:
Cherry MX Compatible Switches (about 60)
any sort of wire
Teensy 2.0
about 60 diodes
soldering iron
to make a functioning keyboard
Heb je dit model geprint? Inloggen en deel je make!
Log in om een reactie achter te laten
InloggenNog geen reacties – wees de eerste!
