Thingiverse

Blink Sync Module 2 Bracket Mount

by solutionhacker

166 Downloads

104 Likes

1 Makes

This is a simple one-piece wall bracket for the Blink Sync Module 2.

While I'm aware that there are wall brackets for the Blink on Amazon and even some designs on Thingiverse, I wanted something that took only 1 hour or less to print. So I designed this and it did the trick.

My design uses only 9 grams of filament and is 30% more eco-friendly than some other designs I've seen online. The fitting works really well with the latest Blink Sync Module 2 and USB adapter. It fits snug and the USB holes are well accounted for.

I sliced the STL in Cura and used a 30% infill with 0.2 layer height. I printed this in PLA with supports enabled.

Remember that the USB adapter should be inserted from the bottom of the part because one side of the adapter is slightly narrower than the other. Only one side can be slotted in. It's self-explanatory.

Source

Thingiverse

What you need to print this: Intermediate Medium confidence

Why?

print-in-place design · supports needed

Print-in-place Supports required

Supports 2/3

Assembly 0/3

Settings 1/3

Bed size 0/3

Post-process 0/3

Printer

FDM / FFF

File format

STL

Material

PLA

Est. print time

1 h

Software

Cura, PrusaSlicer, or similar

Frequently Asked Questions

Does Blink Sync Module 2 Bracket Mount need supports when printing?

Nope — Blink Sync Module 2 Bracket Mount is print-in-place, so it comes off the bed ready to use. No supports, no assembly.

How long does it take to print Blink Sync Module 2 Bracket Mount?

According to the design notes, Blink Sync Module 2 Bracket Mount takes approximately 1 hours to print at standard settings (0.2 mm layer height, 15% infill). Actual print time varies based on your printer speed, layer height, and infill density.

What file format is Blink Sync Module 2 Bracket Mount available in?

Blink Sync Module 2 Bracket Mount is available in STL format. These files can be opened and sliced using free software such as Cura, PrusaSlicer, Bambu Studio, or OrcaSlicer for FDM printing, or ChiTuBox and Lychee Slicer for resin printing. The download is provided through Thingiverse.

Is Blink Sync Module 2 Bracket Mount free to download?

Yes, Blink Sync Module 2 Bracket Mount is available as a free download through Thingiverse. Always check the license on the original platform to understand commercial use, remixing, and attribution requirements.

No ratings yet

No comments yet – be the first!

Blink Sync Module 2 Bracket Mount

Add to Collection