Dancing Doll

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 200x200mm in size. You can change the X and Y but Z must remain the same.You may print at higher layer heights below the Min Depth of 0.48mmActual Depth is 4.6mm Filaments Used:PLA BambuLab Basic Black Transmission Distance: 0.6PLA BambuLab Basic Jade White Transmission Distance: 5PLA BambuLab Basic Blue Gray Transmission Distance: 3PLA BambuLab Matte Lilac Purple Transmission Distance: 2PLA BambuLab Basic Pink Transmission Distance: 8This print uses 5 unique filaments. Substitute as needed. Swap Instructions:Start with BlackAt layer #9 (0.8mm) swap to Jade WhiteAt layer #13 (1.12mm) swap to Blue GrayAt layer #19 (1.6mm) swap to Jade WhiteAt layer #28 (2.32mm) swap to Lilac PurpleAt layer #43 (3.52mm) swap to PinkAt layer #50 (4.08mm) swap to Jade White for the rest. Boost MeGot a Boost to spare? Every little bit helps the motivation. Thank you!MembershipWant to go commercial or maybe just show