Slicer Discord
Dice magic trick – 3D-printbaar model van MakerWorld MakerWorld
Hand Tools

Dice magic trick

15 Downloads
12 Likes
12 Makes
Model downloaden
This is a cube magic trick. It is fully 3d printed. Here is how to do it: Ask a partner or guest to take the dice out and choose a number 1-6 and place the dice back in the box on that side. All this is happening while you hole the box behind your back and the lid in your other hand.Turn around so the audience cannot see the box.Put the lid on the side, not on the top while the box is behind your back.Maneuver the box to the front of you without them seeing that the the lid is not on the box.Pretend that you are doing magic.Guess the numberQuickly, turn the box to face the audience without them notice that the open side was facing you.The 5th picture is a video following the cube:The 6th picture is a video from the spectator’s point of view:Note: If you have a textured plate then they can tell which side is the bottom.If the audience say that you are feeling for the dots, than tell them that if you are feeling for the dots, they would hear the cube move in the box.Boost MePlease boost
Categorie
Hand Tools
Bron
MakerWorld
Gepubliceerd
Bijgewerkt
Wat je nodig hebt om te printen: Beginner Lage betrouwbaarheid
Eendelig
Supports 1/3
Montage 0/3
Instellingen 1/3
Bedgrootte 0/3
Nabewerking 0/3
Printer
FDM / FFF
Bestandsformaat
STL
Materiaal
PLA
Software
Cura, PrusaSlicer of vergelijkbaar
Zelfde ontwerper, meer platforms

Larry12345 publiceert ook op

2 extra modellen op 1 andere platforms

Geverifieerd door overeenkomende modeltitels op platforms.
Nog geen beoordelingen
Nog geen reacties – wees de eerste!

Vergelijkbare modellen

6 Suggesties
Feed Blog Slicer Kostenrekenmachine Zoeken op afbeelding Indienen Kontakt Discord ☕ Buy me a coffee
DE EN FR ES IT NL

Toevoegen aan collectie