Thingiverse
Drill Powered Hack Saw
von gustafson_cj
7
Downloads
4
Likes
0
Makes
I needed to cut a 2x4 stud in my wall, and had tight clearances. The stud spacing was 16 inches, but my Bosch Sawzall would not fit, so I designed this reciprocating gear-driven adaptation to work with a hack-saw blade, and a portable screw gun.
Printing:
20% Infill
0.2mm layer height
0.4mm nozzle
PETG
Assemble with white lithium grease, or your choice.
Printing:
20% Infill
0.2mm layer height
0.4mm nozzle
PETG
Assemble with white lithium grease, or your choice.
Hast du dieses Modell gedruckt? Einloggen und dein Make teilen!
Melde dich an, um einen Kommentar zu hinterlassen
AnmeldenNoch keine Kommentare – sei der Erste!