Thingiverse

Drill Powered Hack Saw

by gustafson_cj

7 Downloads

4 Likes

0 Makes

I needed to cut a 2x4 stud in my wall, and had tight clearances. The stud spacing was 16 inches, but my Bosch Sawzall would not fit, so I designed this reciprocating gear-driven adaptation to work with a hack-saw blade, and a portable screw gun.

Printing:

20% Infill
0.2mm layer height
0.4mm nozzle
PETG

Assemble with white lithium grease, or your choice.

Source

Thingiverse

What you need to print this: Intermediate Low confidence

Why?

0.20mm layers

Single piece Hardware needed

Supports 1/3

Assembly 0/3

Settings 1/3

Bed size 0/3

Post-process 1/3

Printer

FDM / FFF

File format

STL

Material

PETG

Layer height

0.2 mm

Post-processing

Hardware

Software

Cura, PrusaSlicer, or similar

No ratings yet

No comments yet – be the first!

Drill Powered Hack Saw

Add to Collection