MakerWorld

Hueforge & Lithophane

Flash

di Mano's 3d_Art · Hueforge & Lithophane

6 Download

5 Likes

5 Makes

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 90x160mm in sizeYou may print at higher layer heights below the Min Depth of 0.88mmThe Max Depth is 2.2mm and the Actual Depth is 2.3mm Filaments Used: PLA PolyLite Black Transmission Distance: 0.3 PLA BambuLab Basic Red Transmission Distance: 3.9 PLA BambuLab Basic Orange Transmission Distance: 6.9 PLA BambuLab Basic Yellow Transmission Distance: 5.9This print uses 4 unique filaments Swap Instructions: Start with Black At layer #13 (1.12mm) swap to Red At layer #17 (1.44mm) swap to Orange At layer #24 (2mm) swap to Yellow for the rest.

HUEFORGE Hue Forge Hue Forge Art HueForge Hueforege Hueforge hueforge Art art art2026 flash the flash theflash Marvel marvel comic comics movie movies serie

Categoria

Hueforge & Lithophane

Fonte

MakerWorld

Pubblicato

09.02.2026

Aggiornato

08.05.2026

Cosa serve per stampare: Principiante Bassa affidabilità

Pezzo unico

Supporti 1/3

Assemblaggio 0/3

Impostazioni 1/3

Dimensioni piano 0/3

Post-lavorazione 0/3

Stampante

FDM / FFF

Formato file

STL

Materiale

PLA

Piano min.

160 mm (Medio)

Software

Cura, PrusaSlicer o simile

Ancora nessuna valutazione

Ancora nessun commento – sii il primo!

Modelli simili

6 Suggerimenti

Flash

Modelli simili

Aggiungi alla collezione