Thingiverse
Glider
von BGKDesign
0
Downloads
0
Likes
0
Makes
Easy-Print Slingshot Glider
Designed to fit a 200 × 200 mm print bed and optimised for fast, reliable printing.
Print Settings
0.6 mm nozzle
0.2 mm layer height
PETG
Weight: 31 g
Print time: 47 minutes
Approximate material cost: £0.30
The uploaded file is pre-sliced for the AD5M Pro using PETG settings.
About the Design
This slingshot glider was created for a school summer fayre and has been through three prototype iterations before reaching the final design. The result is a robust airframe with stable and predictable flight characteristics.
For best performance, apply a small upward bend of approximately 10° to the fuselage after printing. This provides the ideal glide pitch and significantly improves flight stability.
A STEP file is included for anyone who would like to remix or modify the design.
Enjoy flying, and feel free to share your remixes and flight results!
Designed to fit a 200 × 200 mm print bed and optimised for fast, reliable printing.
Print Settings
0.6 mm nozzle
0.2 mm layer height
PETG
Weight: 31 g
Print time: 47 minutes
Approximate material cost: £0.30
The uploaded file is pre-sliced for the AD5M Pro using PETG settings.
About the Design
This slingshot glider was created for a school summer fayre and has been through three prototype iterations before reaching the final design. The result is a robust airframe with stable and predictable flight characteristics.
For best performance, apply a small upward bend of approximately 10° to the fuselage after printing. This provides the ideal glide pitch and significantly improves flight stability.
A STEP file is included for anyone who would like to remix or modify the design.
Enjoy flying, and feel free to share your remixes and flight results!
Hast du dieses Modell gedruckt? Einloggen und dein Make teilen!
Melde dich an, um einen Kommentar zu hinterlassen
AnmeldenNoch keine Kommentare – sei der Erste!