Thingiverse
Hard Drive Stackable Mounts
par Penwinn
31
Téléchargements
19
Likes
0
Makes
This comes in 3 parts depending on configuration needs. All configurations allow air flow for cooling.
The Base Mount can hold a HDD that can be easily swapped or a permanent SSD installed at the bottom. Base Mounts can be stacked and held together (I used 3M x 12mm screws and nuts to minimize vibrations).
The Middle Mount can only hold a SSD but can allow rapid swap out. It also leaves enough space to install a SSD at the bottom.
The Top Mount can only hold a permanent SSD.
Recommend purchasing thumbscrews 6-32 x 5 for securing drives.
The Base Mount can hold a HDD that can be easily swapped or a permanent SSD installed at the bottom. Base Mounts can be stacked and held together (I used 3M x 12mm screws and nuts to minimize vibrations).
The Middle Mount can only hold a SSD but can allow rapid swap out. It also leaves enough space to install a SSD at the bottom.
The Top Mount can only hold a permanent SSD.
Recommend purchasing thumbscrews 6-32 x 5 for securing drives.
Vous avez imprimé ce modèle ? Connectez-vous et partagez votre make !
Connectez-vous pour laisser un commentaire
Se connecterPas encore de commentaires – soyez le premier !