Thingiverse
LED Lenser RIS mount
1
Downloads
1
Likes
0
Makes
Tourch mount designed for the LED Lenser P7 and P14.
The P14 has a 34.5mm hole so will fit other torches of the same size.
The P7 has a 30mm hole so will fit other torches of the same size.
Printed with no supports.
I have used M3 Cap head bolts
2 x 30mm for the rail clamp
2 x 16mm for the torch clamp
4 x M3 brass inserts the ones i used have a dia 4.4mm and length of 5.7mm if using a diffrent dia you will need to adjest the hole, they were heat fitted and do not press fit the holes.
The P14 has a 34.5mm hole so will fit other torches of the same size.
The P7 has a 30mm hole so will fit other torches of the same size.
Printed with no supports.
I have used M3 Cap head bolts
2 x 30mm for the rail clamp
2 x 16mm for the torch clamp
4 x M3 brass inserts the ones i used have a dia 4.4mm and length of 5.7mm if using a diffrent dia you will need to adjest the hole, they were heat fitted and do not press fit the holes.
Did you print this model? Sign in and share your make!
Sign in to leave a comment
Sign inNo comments yet – be the first!