Thingiverse
LED Lenser RIS mount
1
Download
1
Likes
0
Makes
Tourch mount designed for the LED Lenser P7 and P14.
The P14 has a 34.5mm hole so will fit other torches of the same size.
The P7 has a 30mm hole so will fit other torches of the same size.
Printed with no supports.
I have used M3 Cap head bolts
2 x 30mm for the rail clamp
2 x 16mm for the torch clamp
4 x M3 brass inserts the ones i used have a dia 4.4mm and length of 5.7mm if using a diffrent dia you will need to adjest the hole, they were heat fitted and do not press fit the holes.
The P14 has a 34.5mm hole so will fit other torches of the same size.
The P7 has a 30mm hole so will fit other torches of the same size.
Printed with no supports.
I have used M3 Cap head bolts
2 x 30mm for the rail clamp
2 x 16mm for the torch clamp
4 x M3 brass inserts the ones i used have a dia 4.4mm and length of 5.7mm if using a diffrent dia you will need to adjest the hole, they were heat fitted and do not press fit the holes.
Hai stampato questo modello? Accedi e condividi il tuo make!
Accedi per lasciare un commento
AccediAncora nessun commento – sii il primo!