Thingiverse
M5Multi II shell
von sirmorris
3
Downloads
5
Likes
2
Makes
This is a cartridge shell for the M5Multi-II multi-cart for the Sord M5 computer by SirMorris.
There are 2 versions of the multi-cart PCB. The early versions were produced before May 2019. The later versions produced after this date have a small detent that allows it to be held in place with a suitable cartridge shell.
With this in mind there are 3 printable files in the download. A back part that is suitable for both types of PCB, and two front parts. Print one back part and one front part depending on which PCB you have.
The earlier boards will need be held in place using hot glue, or something similar, on the stand-offs. The newer boards don't need any adhesive.
There are 2 versions of the multi-cart PCB. The early versions were produced before May 2019. The later versions produced after this date have a small detent that allows it to be held in place with a suitable cartridge shell.
With this in mind there are 3 printable files in the download. A back part that is suitable for both types of PCB, and two front parts. Print one back part and one front part depending on which PCB you have.
The earlier boards will need be held in place using hot glue, or something similar, on the stand-offs. The newer boards don't need any adhesive.
Hast du dieses Modell gedruckt? Einloggen und dein Make teilen!
Melde dich an, um einen Kommentar zu hinterlassen
AnmeldenNoch keine Kommentare – sei der Erste!