Thingiverse
M5Multi II shell
par sirmorris
3
Téléchargements
5
Likes
2
Makes
This is a cartridge shell for the M5Multi-II multi-cart for the Sord M5 computer by SirMorris.
There are 2 versions of the multi-cart PCB. The early versions were produced before May 2019. The later versions produced after this date have a small detent that allows it to be held in place with a suitable cartridge shell.
With this in mind there are 3 printable files in the download. A back part that is suitable for both types of PCB, and two front parts. Print one back part and one front part depending on which PCB you have.
The earlier boards will need be held in place using hot glue, or something similar, on the stand-offs. The newer boards don't need any adhesive.
There are 2 versions of the multi-cart PCB. The early versions were produced before May 2019. The later versions produced after this date have a small detent that allows it to be held in place with a suitable cartridge shell.
With this in mind there are 3 printable files in the download. A back part that is suitable for both types of PCB, and two front parts. Print one back part and one front part depending on which PCB you have.
The earlier boards will need be held in place using hot glue, or something similar, on the stand-offs. The newer boards don't need any adhesive.
Vous avez imprimé ce modèle ? Connectez-vous et partagez votre make !
Connectez-vous pour laisser un commentaire
Se connecterPas encore de commentaires – soyez le premier !