Mariners Hueforge

Project: New Mariners.hfpPrint at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 200x200mm in sizeYou may print at higher layer heights below the Base Thickness of 0.64mmThe Max allowed Thickness is 2.24mm and the Actual Thickness is 1.6mmFilaments Used: #007672 PLA Paramount 3D Mid Century Teal Transmission Distance: 2 #000000 PLA BambuLab Matte Charcoal Transmission Distance: 0.6 #062b4d PLA PolyTerra Army Blue Transmission Distance: 0.3 #4c5f71 PLA BambuLab Basic Blue Gray Transmission Distance: 3 #00b1b7 PLA BambuLab Basic Turquoise Transmission Distance: 1.4 #de1619 PLA PolyTerra Lava Red Transmission Distance: 1 #e6dede PLA Overture Matte White Transmission Distance: 3.7This print uses 7 unique filamentsSwap Instructions: Start with Mid Century Teal At layer #9 (0.8mm) swap to Charcoal At layer #10 (0.88mm) swap to Army Blue At layer #11 (0.96mm) swap to Blue Gray At layer #13 (1.12mm) swap to Turquoise At layer #14 (1.2mm) swap to Lava Red At l