Thingiverse
Electronics
Vai al Modello
Microscope arm mount
21
Download
68
Likes
0
Makes
A mount to attach to the microphone shockmount bracket.
Place the microscope and then tighten the screw to lock it in place. The mount is tapered to hold the microscope securely.
I designed this mount to be quick to print, not interfere with focus adjustment (regardless of position), facilitate access to the buttons, and allow the microscope to be rotated to adjust for use.
Dimensions:
Upper diameter - 30.4mm
Lower diameter - 27mm
Hole (fixation) - 6mm
Width (fixation) - 6.2mm
Place the microscope and then tighten the screw to lock it in place. The mount is tapered to hold the microscope securely.
I designed this mount to be quick to print, not interfere with focus adjustment (regardless of position), facilitate access to the buttons, and allow the microscope to be rotated to adjust for use.
Dimensions:
Upper diameter - 30.4mm
Lower diameter - 27mm
Hole (fixation) - 6mm
Width (fixation) - 6.2mm
Hai stampato questo modello? Accedi e condividi il tuo make!
Accedi per lasciare un commento
AccediAncora nessun commento – sii il primo!
