Thingiverse
Model Rocket
por jronfr
60
Descargas
30
Likes
0
Makes
https://youtu.be/Q5707JlOWHc
Model rocket. Will fit C and D sized rocket motors. Made this rocket from a college CAD course. I have printed 4 of these rockets and they work like a charm. Overall height is around 340mm.
Inspired by: printedrockets.com (See site for additional instructions)
Other required parts:
Shock Cord (Rubber band that connects the Cone to the Body)
Parachute
Flame retardant paper (to protect parachute from melting)
Rocket motor (D12-0 or D12-3 seem to work the best) C size motors also fit
15 - 20 Grams of molding clay must be molded into the inside tip of the nosecone for stability
Have fun!
Model rocket. Will fit C and D sized rocket motors. Made this rocket from a college CAD course. I have printed 4 of these rockets and they work like a charm. Overall height is around 340mm.
Inspired by: printedrockets.com (See site for additional instructions)
Other required parts:
Shock Cord (Rubber band that connects the Cone to the Body)
Parachute
Flame retardant paper (to protect parachute from melting)
Rocket motor (D12-0 or D12-3 seem to work the best) C size motors also fit
15 - 20 Grams of molding clay must be molded into the inside tip of the nosecone for stability
Have fun!
¿Has impreso este modelo? Inicia sesión y comparte tu make.
Inicia sesión para dejar un comentario
Iniciar sesiónAún no hay comentarios – ¡sé el primero!
