Thingiverse

MPMini Raspberry Pi Camera Mount

von JeremyLaurenson

8 Downloads

9 Likes

0 Makes

This is a mount for a Raspberry Pi camera that attaches to the front of the bed using the two existing screws. It points the camera at the middle of the bed and is simple to use.

Be careful attaching your camera (I use hotglue) so that the board is not too far to the left or it will interfere with the stock fan on the hotend.

With the standard hotend, the camera should be mounted dead center.

You can adjust your cmera focus as described here: http://elinux.org/Rpi_Camera_Module#Adjusting_Lens_Focus

Quelle

Thingiverse

Was du zum Drucken brauchst: Mittel Niedrige Konfidenz

Einteilig Hardware nötig

Supports 1/3

Zusammenbau 0/3

Einstellungen 1/3

Druckbett 0/3

Nachbearbeitung 1/3

Drucker

FDM / FFF

Dateiformat