Thingiverse
NAC Splitfire Case
von Zepherino
0
Downloads
0
Likes
0
Makes
This is a case for the most recent version of the NAC Splitfire as of April, 2023.
You will need five M2x6 bolts and nuts to attach everything. Installation is self evident, but a bit finicky because of the small bolt and nut size. I suggest placing the nuts into the holes first, and screwing a bolt through each nut before installation in order to align and friction fit them into the holes and make installation much easier.
You will need five M2x6 bolts and nuts to attach everything. Installation is self evident, but a bit finicky because of the small bolt and nut size. I suggest placing the nuts into the holes first, and screwing a bolt through each nut before installation in order to align and friction fit them into the holes and make installation much easier.
Zepherino veröffentlicht auch auf
8 zusätzliche Modelle auf 1 weiteren Plattformen
Hast du dieses Modell gedruckt? Einloggen und dein Make teilen!
Melde dich an, um einen Kommentar zu hinterlassen
AnmeldenNoch keine Kommentare – sei der Erste!