Thingiverse
NAC Splitfire Case
por Zepherino
0
Descargas
0
Likes
0
Makes
This is a case for the most recent version of the NAC Splitfire as of April, 2023.
You will need five M2x6 bolts and nuts to attach everything. Installation is self evident, but a bit finicky because of the small bolt and nut size. I suggest placing the nuts into the holes first, and screwing a bolt through each nut before installation in order to align and friction fit them into the holes and make installation much easier.
You will need five M2x6 bolts and nuts to attach everything. Installation is self evident, but a bit finicky because of the small bolt and nut size. I suggest placing the nuts into the holes first, and screwing a bolt through each nut before installation in order to align and friction fit them into the holes and make installation much easier.
Zepherino también publica en
8 modelos adicionales en 1 plataformas más
¿Has impreso este modelo? Inicia sesión y comparte tu make.
Inicia sesión para dejar un comentario
Iniciar sesiónAún no hay comentarios – ¡sé el primero!