Slicer Discord
Network-Attached Storage/ NAS / DAS – 3D printable model from MakerWorld MakerWorld
Electronics

Network-Attached Storage/ NAS / DAS

120 Downloads
49 Likes
12 Makes
Go to Model
8-Bay Disk EnclosureDesigned for connecting up to eight drives to almost any system with an HBA (or similar) controller—perfect for expanding NAS storage when you have no more internal bays. This enclosure is held together with magnets, making assembly straightforward yet sturdy.--------------------------------------------------------------------------------POWER OPTIONS1. If your existing server has spare SATA/Molex connectors - Simply use a cable from your server’s PSU to power the backplane. - No additional power adapter is needed in this case.2. If your existing server has a spare 8-pin PCI (GPU) connector - You do need a power adapter to connect the 8-pin PCI cable to the backplane.3. If your system has no free PSU connectors - You’ll need an external 12V barrel (DC5525) adapter or an external PSU (e.g., a 12V, 200W supply) plus a power adapter to feed the backplane.--------------------------------------------------------------------------------KEY FEATURES- Easy Assembly via Magn
Category
Electronics
Source
MakerWorld
Published
Updated
What you need to print this: Intermediate Low confidence
Single piece Hardware needed
Supports 1/3
Assembly 0/3
Settings 1/3
Bed size 0/3
Post-process 1/3
Printer
FDM / FFF
File format
STL
Material
PLA, Polycarbonate
Post-processing
Hardware
Software
Cura, PrusaSlicer, or similar
No ratings yet
No comments yet – be the first!

Similar Models

6 Suggestions
Feed Blog Slicer Cost Calculator Image Search Submit Kontakt Discord ☕ Buy me a coffee
DE EN FR ES IT NL

Add to Collection