MakerWorld

Gadgets

Nitecore TIP flashlight shell

di Citruspers · Gadgets

8 Download

1 Likes

3 Makes

A replacement shell for the Nitecore TIP (V1). 1mm thick, 0.5mm detail, should work on both MSLA and FDM.No supports needed.In order to get maximum transparency using MSLA I used a clear resin (Anycubic Clear), printed the object flat on the build plate, cured in water (after washing) and gave it a few coats of clear spraypaint.The Anycubic clear resin is pretty brittle, so take care not to over-tighten the screws. Siraya Tech Blu would probably be best if you want something tough and transparent, but as I don't have any, I had to make do.

case mod replacement keychain housing shell torch v1 flashlight tip transparent casing nitecore cri

Categoria

Gadgets

Fonte

MakerWorld

Pubblicato

16.08.2024

Aggiornato

30.04.2026

Cosa serve per stampare: Intermedio Bassa affidabilità

Pezzo unico Viteria richiesta

Supporti 1/3

Assemblaggio 0/3

Impostazioni 1/3

Dimensioni piano 0/3

Post-lavorazione 1/3

Stampante

FDM / FFF

Formato file

STL

Materiale

PLA

Piano min.

50 mm (Piccolo)

Post-elaborazione

Viteria

Software

Cura, PrusaSlicer o simile

Stesso designer, più piattaforme

Citruspers pubblica anche su

71 modelli aggiuntivi su altre 1 piattaforme

Printables

71 modelli

♥ 1,921 ↓ 12,072 ⚒ 49

Ancora nessuna valutazione

Ancora nessun commento – sii il primo!

Modelli simili

6 Suggerimenti

Nitecore TIP flashlight shell

Modelli simili

Aggiungi alla collezione