Thingiverse

Quick Print Faceshield

by In2Go

13 Downloads

12 Likes

0 Makes

A lot of the designs I was seeing available used too much filament for what was needed, was not comfortable on the head, or secure enough...and had some spare time for some reason :).... so here is my quick print face shield design. Can print 3 on a 200x200mm in less that 2 hours with very conservative settings.

Clear plastic in picture was cut from a plastic clamshell packaging for a mirror but can use any clear plastic like a transparency or 2 liter bottle. Use a hole punch to punch three holes spaced 2.75 inches apart (or a 3 hole punch set as such) and some rubber bands. The headband is pretty flexible, even with PLA, and quite comfortable but if wrapped with a paper towel I could wear it all day. Can be worn with glasses and small N95 masks.

***THIS WILL NOT STOP THE SPREAD OF COVID-19 OR GERMS*** Only meant to serve as a personal reminder not to touch your face while completing absolutely essential tasks!!

2 liter comfortable Corona corona virus covid-19 COVID19 face face mask faceshield flexible Health light mask plastic bottle ppe print quick Safety shield transparency 2 liter comfortable Corona corona virus covid-19 COVID19 face face mask faceshield flexible Health light mask plastic bottle ppe print quick Safety shield transparency

Source

Thingiverse

What you need to print this: Intermediate Medium confidence

Why?

large print

Single piece

Supports 1/3

Assembly 0/3

Settings 1/3

Bed size 2/3

Post-process 0/3

Printer

FDM / FFF

File format

STL

Material

PLA, ABS

Min. bed size

200 mm (Large)

Est. print time

2 h

Software

Cura, PrusaSlicer, or similar

Frequently Asked Questions

Which 3D printer is suitable for Quick Print Faceshield?

Any FDM printer should handle Quick Print Faceshield just fine. It's been printed on machines like Bambu Lab A1, Prusa MK4, Creality Ender 3, Anycubic Kobra. A minimum build volume of 200 mm is recommended.

How long does it take to print Quick Print Faceshield?

According to the design notes, Quick Print Faceshield takes approximately 2 hours to print at standard settings (0.2 mm layer height, 15% infill). Actual print time varies based on your printer speed, layer height, and infill density.

What file format is Quick Print Faceshield available in?

Quick Print Faceshield is available in STL format. These files can be opened and sliced using free software such as Cura, PrusaSlicer, Bambu Studio, or OrcaSlicer for FDM printing, or ChiTuBox and Lychee Slicer for resin printing. The download is provided through Thingiverse.

Is Quick Print Faceshield free to download?

Yes, Quick Print Faceshield is available as a free download through Thingiverse. Always check the license on the original platform to understand commercial use, remixing, and attribution requirements.

No ratings yet

No comments yet – be the first!

Quick Print Faceshield

Add to Collection