Thingiverse
Shelf Bracket
door zac_attack257
14
Downloads
11
Likes
0
Makes
➤ My first upload. Just a simple shelf-bracket I created in Fusion 360.
➤ I used #8x2" (#8x5cm) wood screws. This is meant to be screwed directly into stud.
➤ I was able to print two of these brackets on my 235mm x 235m x 400mm buildplate.
(I had to expand the buildplate area from the default Ender 3 Pro setting in Cura. This is done by clicking "Preferences" in the top-left, "configure","printers","machine settings", and then changing the x and y printer parameters to "235" respectively. This increases the bed size to the actual limits of the Ender 3 Pro stock buildplate.)
➤ Print time is about 11 hours for two, or a little under 6 hours for one.
➤ I used these brackets to hang a shelf above our washer and dryer.
➤ I would love to see what others use this for! Thanks
➤ I used #8x2" (#8x5cm) wood screws. This is meant to be screwed directly into stud.
➤ I was able to print two of these brackets on my 235mm x 235m x 400mm buildplate.
(I had to expand the buildplate area from the default Ender 3 Pro setting in Cura. This is done by clicking "Preferences" in the top-left, "configure","printers","machine settings", and then changing the x and y printer parameters to "235" respectively. This increases the bed size to the actual limits of the Ender 3 Pro stock buildplate.)
➤ Print time is about 11 hours for two, or a little under 6 hours for one.
➤ I used these brackets to hang a shelf above our washer and dryer.
➤ I would love to see what others use this for! Thanks
Heb je dit model geprint? Inloggen en deel je make!
Log in om een reactie achter te laten
InloggenNog geen reacties – wees de eerste!