Thingiverse
Simple Rack
par acutae
1
Téléchargements
4
Likes
0
Makes
Parts list to be printed：
pillar1.STL x2
pillar2.STL x2
Internal_pillar.STL x2
beam.STL x4
Internal_beam.STL x2
board.STL x16
All parts need about 2kg material(PLA) in total.
I use a 0.4mm nozzle and print at 0.2mm layer thickness. And it seems that using a larger nozzle and a thicker layer is also OK.
Because of the large size of the pillar parts, it is recommended to use raft to prevent curling.
pillar1.STL x2
pillar2.STL x2
Internal_pillar.STL x2
beam.STL x4
Internal_beam.STL x2
board.STL x16
All parts need about 2kg material(PLA) in total.
I use a 0.4mm nozzle and print at 0.2mm layer thickness. And it seems that using a larger nozzle and a thicker layer is also OK.
Because of the large size of the pillar parts, it is recommended to use raft to prevent curling.
Vous avez imprimé ce modèle ? Connectez-vous et partagez votre make !
Connectez-vous pour laisser un commentaire
Se connecterPas encore de commentaires – soyez le premier !