Thingiverse
Simple Rack
door acutae
1
Downloads
4
Likes
0
Makes
Parts list to be printed：
pillar1.STL x2
pillar2.STL x2
Internal_pillar.STL x2
beam.STL x4
Internal_beam.STL x2
board.STL x16
All parts need about 2kg material(PLA) in total.
I use a 0.4mm nozzle and print at 0.2mm layer thickness. And it seems that using a larger nozzle and a thicker layer is also OK.
Because of the large size of the pillar parts, it is recommended to use raft to prevent curling.
pillar1.STL x2
pillar2.STL x2
Internal_pillar.STL x2
beam.STL x4
Internal_beam.STL x2
board.STL x16
All parts need about 2kg material(PLA) in total.
I use a 0.4mm nozzle and print at 0.2mm layer thickness. And it seems that using a larger nozzle and a thicker layer is also OK.
Because of the large size of the pillar parts, it is recommended to use raft to prevent curling.
Heb je dit model geprint? Inloggen en deel je make!
Log in om een reactie achter te laten
InloggenNog geen reacties – wees de eerste!