Thingiverse
simple temp block
por pfilipe
0
Descargas
0
Likes
0
Makes
In the gcode, look for the M104 command. Example:
M104 S205 ; set temperature
Then add it to the gcode produced from your slicer, after the end blocks, like this:
...
G92 E0
M104 S200 ; set temperature
G1 Z10.200 F7800.000
...
Set the correct temp based on the Z location from the command:
M104 S205 ; set temperature
Then add it to the gcode produced from your slicer, after the end blocks, like this:
...
G92 E0
M104 S200 ; set temperature
G1 Z10.200 F7800.000
...
Set the correct temp based on the Z location from the command:
¿Has impreso este modelo? Inicia sesión y comparte tu make.
Inicia sesión para dejar un comentario
Iniciar sesiónAún no hay comentarios – ¡sé el primero!