Softputer

This is a toy computer (aka the softputer) made for my kids. It is about 7" across by about 5" deep.

I included the step file for the screen so you can add a customized logo or such to the back of the monitor section.

The keys are printed in TPU at 2 walls and 15% infill so they squish down when pressed.

The rest is printed in PLA at 4walls and about 25% infill.

Both at 0.2mm layer height

You will need 2x M3x20mm socket cap screws and 4 x M3x12mm socket cap screws for putting the computer together plus the 6x M3 nuts.