Spool separator

It is tricky a bit to pair two filaments in one spool. And the result is not ideal. As you can see in the first photo, the yellow part is wider. That's because I reeled it first. However, this is a working solution.

As for now, this separator applies only to BestFilament spools with dimensions ID = 73mm, OD = 190mm, inner width = 56mm.

If you're familiar with OnShape it will easy to you customize this thing to your dimensions.

The source is [here](https://cad.onshape.com/documents/871162ac1c77894dcb04f278/w/19e5757660eb9e2d50ed4956/e/1ded226bc31a479083e0d9c3).

#### Printing disclaimer

You must have a well calibrated printer including correct flow setting for the filament which you suppose to use. The printing tolerance - **0.15mm**.

If you're not sure or didn't understand what I'm talking about - don't waste the time to make this thing. Or don't blame me after all that _your_ printed parts don't fit together.

Also in some cases you'll need to use the tools (needle