Thingiverse
STLink V3Mini Case
por JojoS
3
Descargas
0
Likes
0
Makes
This is a simple case for a STLink V3Mini debug probe. It is soldered on an adapterboard. I did not create the adaptor by myself, I used the designed from github:
https://github.com/tw1chao/STLinkV3_Adapter
https://github.com/TMSL/STLINK-V3MINI-Cable-Adapter-Board
Additional parts:
- a 5 mm piece of transparent 3 mm Filament as fiber optic extender for the status LED
- 2 screws 2,9 mm x 16 or 19 mm with countersunk head
https://minischrauben.com/senk-blechschrauben-tx-a2-2-9x16mm--44350.html
https://github.com/tw1chao/STLinkV3_Adapter
https://github.com/TMSL/STLINK-V3MINI-Cable-Adapter-Board
Additional parts:
- a 5 mm piece of transparent 3 mm Filament as fiber optic extender for the status LED
- 2 screws 2,9 mm x 16 or 19 mm with countersunk head
https://minischrauben.com/senk-blechschrauben-tx-a2-2-9x16mm--44350.html
¿Has impreso este modelo? Inicia sesión y comparte tu make.
Inicia sesión para dejar un comentario
Iniciar sesiónAún no hay comentarios – ¡sé el primero!